Lead Wire – 110″

By:

Product Attributes
Priced Per

Pack of 4 Cables

110″ Richmar Lead Wire for the CX2, CX4 and EX4 models

SKU: DM-WQ8112

Category:
Brand:

Richmar lead wires for the CX4, CX2, and EX4.

Product Attributes
Priced Per

Pack of 4 Cables

Reviews

There are no reviews yet

Be the first to review “Lead Wire – 110″”

Your email address will not be published. Required fields are marked *

Q & A

Ask a question
Lead Wire - 110" Lead Wire - 110"
Your question
* Question is required
Name
* Name is required
* Please tick the checkbox to proceed
There are no questions yet

Frequently Asked Questions

Are Richmar Lead Wires compatible with other brands of neuromuscular stimulators, or are they model-specific?

Richmar Lead Wires are designed with specific connectors to ensure a secure, reliable connection to their corresponding Richmar therapy devices. The lead wires for the CX4, CX2, and EX4 models are engineered to interface precisely with the output ports on these units. Using them with non-Richmar devices is not recommended, as the connector pins may not align correctly, potentially resulting in a poor connection, ineffective treatment, or even damage to the ports.

For optimal performance and patient safety, it is always advised to use the manufacturer-specified lead wires. If you are using a device from another brand, you should source leads designed for that specific model to guarantee electrical compatibility and treatment efficacy. Always verify the model number of your device against the product description before purchasing replacement leads.

What is the proper care and cleaning process to ensure the longevity of Richmar lead wires?

Proper maintenance is crucial for extending the functional life of your lead wires. First, always disconnect the wires from the device before cleaning. Use a soft cloth lightly dampened with a mild soap and water solution or an alcohol-based wipe to gently clean the wire cables and connector ends. Avoid submerging the connectors in liquid or allowing moisture to enter the connection points.

During use and storage, practice careful handling: avoid pulling on the wires to disconnect them (grasp the connector itself), do not wrap the wires tightly around the device, and refrain from pinching or crimping the cables. Store them loosely coiled in a clean, dry environment. Following these steps will prevent wire fatigue, connection corrosion, and signal interruption, ensuring reliable performance over many uses.

How do I troubleshoot if the lead wires are not functioning or the patient is not feeling a stimulus?

Begin by performing a visual and physical inspection. Check the entire length of the wires for any obvious cracks, breaks, or kinks. Examine the metal connector pins for bending, corrosion, or debris. Ensure the connectors are fully and firmly inserted into the correct ports on the stimulator device. Next, verify that the electrodes themselves are properly adhered and making full skin contact, as poor adhesion is a common cause of ineffective stimulation.

If the connections are secure, try using a different set of lead wires with the same device and settings. If the stimulus is now effective, the original wires are likely faulty and should be replaced. If there is still no output, the issue may be with the device itself, its batteries, or the electrode pads. This systematic process of elimination helps quickly identify whether the problem lies with the leads, the electrodes, or the stimulator unit.