PegAssist Offloading Insole

By:

The Darco PegAssist is an offloading insole with a removable-peg chassis. Remove the pegs under a wound or ulceration to relieve pressure by up to 60% while the patient keeps walking.

  • PTQ series for the MedSurg
  • PQ series for HeelWedge, Orthowedge and APB
  • PW series for most walking boots

Category:
*Suggested for: Brand:

The Darco PegAssist is an offloading insole system with a multi-indication, removable-peg chassis. It offloads the plantar foot after surgery or when wounds or ulcerations are present, reducing pressure by as much as 60% while the patient remains ambulatory.

Darco MedSurg shoe that takes the PTQ offloading insole
The PTQ series fits the Darco MedSurg.

Features Of The PegAssist Offloading Insole

  • Removable pegs: localized offloading of wounds and ulcerations.
  • Up to 60% pressure reduction: without taking the patient off their feet.
  • Layered construction: 15 mm Plastazote and Multi-Foam base with a 3 mm Poron cover.
  • Poron cover: eliminates ring edema and edge abrasion around the offloaded area.
  • Stabilizer board: included to maintain product integrity.

Choose The Right Series

Pick the offloading insole series that matches the footwear first, then choose the size.

Sizes XS to XL. Use the size chart on this page. One offloading insole system across several shoes and boots keeps clinic inventory simple.

Measure by Shoe Size

X-Small – Women’s 4 – 7
Small – Women’s 7.5 – 10 / Men’s 6 – 8
Medium – Women’s 10.5 – 13 / Men’s 8.5 – 10
Large – Women’s 13+ / Men’s 10.5 – 12
X-Large – Men’s 12.5 – 14

DARCO PEG ASSIST OFFLOADING INSOLE –
Three versions – PTQ, PQ and PW

PTQ Peg Assist –
This version is made to fit our MQ Series Med Surg shoe ONLY. Seven sizes. BLUE bottom layer EVA.
The Peg is a tri-laminated insole consisting of 10 mm dense EVA, 3mm Plastazote and 2mm Poron.
The 15mm combination presents a very effective combination of materials to effectively offload and relieve pressure from a wound of the foot or when post operative site pressure relief is desired.
A patient can receive targeted offloading of up to 65% pressure reduction to the site.
To heal an ulcer of the foot or DFU, you must offload and take the pressure off.

Unlike other knock off insoles on the market, the patient walks on the solid blue Poron top layer. They do not walk on the Pegs. The Poron surface provides support to the site but still maintains excellent pressure relief.
Other companies have the patient walk on the Pegs. This is not the proper way to offload.
1. The pegs will collapse into the offloaded area – defeating the purpose of the offload.
2. Ring edema can form around the edges of the wound, creating another issue to deal with.
The use of the included polybaord is a MUST to keep the offloaded area intact and preserve the integrity of the offload. The polyboard is an adhesive backed item that is meant to be placed on top of the peg portion of the insole once the pegs have been removed for offloading. SEE INSTRUCTIONS on the packaging.

The Peg Assist will last an average size patient about 6-8 weeks, depending on how much they ambulate.
The larger patients – 275 pounds and up, will get 3-4 use from the product under normal conditions.

If the Peg Assist rips or does not function as it should (within the 10 week warranty period), call me (304-781-5249) and I will replace it at no cost.

The PQ Series Peg Assist –
Same materials as the PTQ but this version has a BLACK bottom layer of EVA.
The PQ series fits the following Darco products –
APQ – All Purpose Boot
Duo Med Surg Shoe
Slim Line Cast Shoe
OrthoWedge
HeelWedge
The PQ Peg Assist is a five-size product like the products mentioned above.
Same application process as the PTQ.

PW Peg Assist –
The PW Peg Assist is manufactured to be used with most walking boots on the market to allow that boot to become an offloading walker.
Many clinicians favor using a walking boot and offloading insole to relieve pressure from a DFU or post op site on the plantar surface of the foot. This combination mimics to some degree a TCC- Total contact cast – but without the time, cost and patient restrictions a TCC presents.
Once the clinician has offloaded the PW insole, the clinician places the insole inside the walker liner and the liner wrapped around the patient’s foot/leg. The patient walks on the insole. The PW polyboard has a Velcro strip in place to hold the insole inside the liner without slipping.

Reviews

There are no reviews yet

Be the first to review “PegAssist Offloading Insole”

Your email address will not be published. Required fields are marked *

Q & A

Ask a question
PegAssist Offloading Insole PegAssist Offloading Insole
Your question
* Question is required
Name
* Name is required
* Please tick the checkbox to proceed
There are no questions yet

Frequently Asked Questions

How does the PegAssist offloading insole work?

The insole is built from a grid of removable pegs. You pull out the pegs directly under a wound, ulceration or surgical site, which creates a pocket that takes pressure off that area. Darco rates the system at up to 60% pressure reduction while the patient continues to walk, which supports healing without full non-weight-bearing.

Which footwear does each PegAssist series fit?

The PTQ series fits the square-toe Darco MedSurg. The PQ series fits the HeelWedge, Orthowedge, All Purpose Boot and other Darco offloading products. The PW series is made for most walking boots on the market, so an existing walker can become an offloading walker. Choose the series that matches the footwear first, then the size.

What is the PegAssist made of?

Each insole has a 15 mm base combining Plastazote and Multi-Foam, covered by a 3 mm layer of Poron. The Poron cover eliminates ring edema and edge abrasion around the area where pegs have been removed. A stabilizer board is included to maintain the integrity of the insole during use.