Dual Density Foam Kit
Use the Cramer Dual Density Foam Kit to get the all in one padding benefits of high and low density foam layers.
The Cramer Dual Density Foam Kit consists of four layers of foam, each of which is a dual density layer formed by laminating together high and low density layers. Each sheet is 11 1/2″ wide by 11 1/2″ long. Two sheets each have a 1/8″ thick high density layer combined with a 1/4″ low density layer. The other two each have a 1/4″ high density layer combined with a 1/2″ low density layer.
The Cramer Dual Density Foam Kit combines the advantages of high density foam (protection from high velocity impact) and low density foam (greater comfort). The low density layer is softer and helps to diffuse pressure. At the same time, the harder high density side absorbs impacts. The dual density foam therefore eliminates the need for two separate layers of differing densities.
Q & A
Table of Contents
Frequently Asked Questions
What makes Cramer Dual Density Foam different from single-density foam?
Unlike traditional foam padding, which offers either impact protection or patient comfort—but rarely both—the Cramer Dual Density Foam Kit integrates two distinct densities within a single, laminated sheet. Each of the four foam layers combines a firm, high-density side with a softer, low-density side. This design eliminates the need to stack separate foam types for different purposes.
The high-density layer excels at absorbing high-velocity impacts, making it ideal for protecting bony prominences or injured areas from external forces. Meanwhile, the low-density layer diffuses pressure evenly across the skin, significantly enhancing patient comfort during prolonged wear. Because both densities are bonded together, clinicians can apply a single piece of foam rather than managing two separate layers that may shift or separate.
In essence, this dual-density construction provides a superior balance of protection and cushioning. It reduces the risk of pressure-related skin irritation while maintaining robust shock absorption—features that single-density foams cannot replicate. This thoughtful engineering makes the kit particularly valuable in sports medicine, orthopedics, and rehabilitation settings.
How do I choose which Cramer Dual Density foam sheet to use for a specific injury?
The Cramer Dual Density Foam kit includes two distinct sheet types, each tailored to different clinical needs. Two sheets feature a 1/8″ high-density layer bonded to a 1/4″ low-density layer—ideal for applications requiring a lower profile and moderate impact protection. The remaining two sheets combine a 1/4″ high-density layer with a 1/2″ low-density layer, offering greater thickness and enhanced pressure diffusion.
For acute injuries or sensitive areas where skin breakdown is a concern—such as over a surgical incision or a superficial contusion—the thicker low-density layer (1/2″) is preferable. Its softer composition spreads forces more gently, reducing focal pressure. Conversely, for protecting areas prone to recurrent impact, such as the shin or lateral ankle in contact sports, the denser, thinner high-density layer (1/8″ or 1/4″) provides superior shock absorption without adding unnecessary bulk.
Ultimately, selection depends on the balance between impact risk and tissue sensitivity. When in doubt, begin with the thicker low-density side against the skin. You can always trim or layer sheets, as each 11.5″ x 11.5″ square is generously sized for custom cutting.
Can Cramer Dual Density foam be trimmed or shaped to fit unusual body contours?
Yes. Each foam sheet measures 11.5 inches wide by 11.5 inches long, providing ample material for custom fabrication. The dual-density construction remains stable when cut, meaning you can trim the foam into virtually any shape—circles, strips, donut pads, or anatomical contours—without delamination or loss of function.
To shape the foam, use sharp, heavy-duty scissors or a rotary cutter for clean edges. You may also bevel or taper the edges by shaving away the low-density layer near the perimeter, which helps reduce pressure points and improves adherence under tape or elastic wraps. Because each sheet is laminated, the two densities stay securely bonded even after aggressive cutting.
Common custom applications include heel pads for Achilles tendinopathy, metatarsal domes for forefoot pain, ulnar groove pads for elbow protection, and spinal padding for back braces. The foam’s closed-cell nature also resists moisture absorption, making it suitable for repeated use in athletic and clinical environments. Always test fit the trimmed piece before final application to ensure optimal comfort and alignment.


Reviews
There are no reviews yet