Foam Roller Wall Mount Storage Rack

Find out how this foam roller wall mount storage rack can provide convenient wall storage for 6 foam rollers.

SKU: CD-30-2180

Category:

Convenient wall storage for 6 foam rollers. This foam roller wall mount storage rack has polished stainless steel construction. The rack ships unassembled, but once assembled one can easily load the items at the top and remove them from the bottom.

Reviews

There are no reviews yet

Be the first to review “Foam Roller Wall Mount Storage Rack”

Your email address will not be published. Required fields are marked *

Q & A

Ask a question
Foam Roller Wall Mount Storage Rack Foam Roller Wall Mount Storage Rack
Your question
* Question is required
Name
* Name is required
* Please tick the checkbox to proceed
There are no questions yet

Frequently Asked Questions

Will this foam roller wall mount storage rack fit all sizes and types of foam rollers, including textured or dense models?

Yes, the design accommodates a wide variety of foam roller dimensions, but checking your roller’s diameter is essential. Most standard foam rollers measure between 5 and 6 inches in diameter, and this polished stainless steel rack is engineered to accept rollers within that typical range. The open-bottom loading design allows rollers of varying lengths—from short 12-inch mobility balls to full 36-inch rollers—to be stored vertically side by side.

However, caution is advised for oversized or heavily textured rollers. Rollers with large protruding bumps, knobs, or high-density vibration mechanisms may exceed the internal width of each storage slot. Before purchasing, measure your roller’s widest point. Smooth, standard-density foam rollers will slide in and out effortlessly, while very soft, oversized rollers might compress slightly and still fit, but rigid textured models could become stuck.

For mixed collections, the six-slot capacity offers flexibility. You can dedicate specific slots to different roller densities. The ability to load from the top and remove from the bottom means you never have to force a roller past an obstruction, preserving both the roller’s surface and the rack’s polished finish.

How difficult is the assembly process, and what tools are required?

This foam roller wall mount storage rack ships unassembled, but the assembly is straightforward for anyone comfortable with basic hardware. You will receive polished stainless steel side panels, crossbars, and mounting brackets. Typically, assembly requires only a Phillips-head screwdriver and an Allen wrench (often included). The process involves securing the horizontal bars to the side plates to form six individual roller bays.

Most users complete assembly in under 20 minutes. The key is to partially tighten all screws first, ensuring the structure remains square, then fully tighten once all pieces are aligned. Because stainless steel is durable but can scratch, work on a soft surface like a towel or carpet. The manufacturer provides clear, diagrammed instructions, and because there are no complex moving parts, the risk of assembly error is low.

One helpful tip: pre-thread all screws by hand to avoid cross-threading. Once assembled, the rack becomes extremely rigid. If you are not confident using power tools, a manual screwdriver is actually preferable, as it prevents overtightening, which could strip the stainless steel threads.

Can this foam roller wall mount storage rack be securely mounted on drywall without hitting studs, and what weight will it hold?

For safety and stability, mounting directly into wall studs is strongly recommended. Six foam rollers can weigh between 15 and 25 pounds total, and the leverage created when removing a roller from the bottom adds dynamic force. Polished stainless steel is heavy itself. Mounting into drywall using only plastic anchors will likely fail over time, potentially damaging both the wall and your rollers.

If studs are unavailable at your desired height, use heavy-duty toggle bolts rated for at least 50 pounds each. Standard expansion anchors are insufficient. You should mount the rack using a minimum of four screws—two at the top rail and two at the bottom. The rack’s design typically includes keyhole slots or flanges that conceal mounting hardware, giving a clean, professional look.

Always verify the wall’s composition before drilling. For concrete, brick, or tile walls, use masonry bits and appropriate anchors. The rack itself, once properly mounted, will support the full six-roller capacity without bending or loosening. For renters or those avoiding wall damage, consider mounting the rack onto a large plywood board first, then securing that board to the wall—this distributes weight across a broader area while still providing a sturdy, removable solution.