Hydrocollator Stationary Heating Unit

By:

The stainless steel Hydrocollator® Stationary Heating Unit from Chattanooga will provide year after year of temperature consistent HotPacs™, courtesy of its thermostatic controls.


Category:
Brand:

The Hydrocollator® Stationary Heating Unit from Chattanooga is built to last and be simple to maintain. Made of high quality stainless steel, these units will provide year after year of temperature consistent HotPacs™, courtesy of their thermostatic controls.

The units are easy to operate and have controls located in the rear, near the bottom. You can adjust the thermostat (located on the control panel) using the adjusting screw on it. You turn the screw counterclockwise to lower the temperature and vice versa.

The HotPacs used with the Hydrocollator will provide moist heat for treatment of chronic injuries. Compared to dry forms of heat, most heat can better penetrate your body’s muscles and provide needed pain relief. Be sure to wrap the HotPacs in a towel or other form of insulation before applying them to your skin. The HotPacs can have a temperature as high as 160ºF and applying them to your bare skin can cause burns or other similar injuries.

There are several models of the Hydrocollator® Stationary Heating Unit:

  • Model E-1 includes:
    • 4 standard size HotPacs™ (SKU 2102); or
    • 3 standard and 1 cervical HotPac™ (SKU 2102-2); or
    • 2 standard size and 2 cervical HotPacs™ (SKU 2102-3).
  • Model E- 2 includes 2 oversize, 1 cervical and 3 standard HotPacs™ (SKU 2802).

Hydrocollator® Stationary Heating Unit Model E-1: Technical Specifications

  • Mains Power: 110~120 V 50/60 Hz
  • Power Consumption: 1000W
  • Weight: 15 lb (7 kg)
  • Shipping Weight: 21 lb (8 kg)
  • Dimensions: 13”L x 8”W x 16”H (33 cm x 20 cm x 41 cm)
  • Electrical Safety Class: Class 1, Type B
  • Safety Tests: Conforms to UL 60601-1, certified to Can/CSA C222 No. 601.1

Hydrocollator® Stationary Heating Unit Model E-2: Technical Specifications

  • Mains Power: 110~120 V 50/60 Hz
  • Power Consumption: 1000W
  • Weight: 29 lb (13 kg)
  • Shipping Weight: 46 lb (20 kg)
  • Dimensions: 15”L x 13”W x 20”H (38 cm x 33 cm x 51 cm)
  • Electrical Safety Class: Class 1, Type B
  • Safety Tests: Conforms to UL 60601-1, certified to Can/CSA C222 No. 601.1

Reviews

There are no reviews yet

Be the first to review “Hydrocollator Stationary Heating Unit”

Your email address will not be published. Required fields are marked *

Q & A

Ask a question
Hydrocollator Stationary Heating Unit Hydrocollator Stationary Heating Unit
Your question
* Question is required
Name
* Name is required
* Please tick the checkbox to proceed
There are no questions yet

Frequently Asked Questions

What is the primary clinical benefit of using a Hydrocollator Stationary Heating Unit?

The Hydrocollator is designed to deliver consistent, therapeutic moist heat through its HotPacs™, making it an essential tool for treating chronic injuries. Unlike dry heat sources, the moist heat generated by these units penetrates more deeply into muscles and soft tissues.

This deeper penetration helps alleviate pain, reduce muscle stiffness, and improve local circulation. By maintaining a precise temperature via reliable thermostatic controls, the unit ensures each HotPac™ is ready for effective, repeatable treatments.

However, clinical safety is paramount. Because HotPacs™ can reach temperatures as high as 160°F, they must never be applied directly to bare skin. Always wrap the pack in a towel or other insulating layer to prevent burns or tissue damage.

How easy is it to operate and maintain the Hydrocollator Stationary Heating Unit?

These units are engineered for simplicity and durability, constructed from high-quality stainless steel to withstand years of regular clinical use. Operation is straightforward: the controls are located at the rear near the bottom, keeping them accessible yet unobtrusive.

To adjust the temperature, use the adjusting screw on the control panel. Turning the screw counterclockwise lowers the temperature, while turning it clockwise raises it. This simple mechanism allows for precise control without complex programming.

Maintenance is equally minimal, thanks to the rust-resistant stainless steel construction and thoughtful design. The units are built to provide year-after-year, temperature-consistent performance, allowing clinicians to focus on patient care rather than equipment troubleshooting.

Which Hydrocollator Stationary Heating Unit model—E-1 or E-2—is right for my practice?

The choice depends entirely on your clinical volume and space requirements. The Model E-1 is compact (13”L x 8”W x 16”H) and weighs only 15 lb, making it ideal for smaller clinics or private practices. It accommodates four standard HotPacs™, or a mix of standard and cervical packs depending on the SKU selected.

The Model E-2 is significantly larger (15”L x 13”W x 20”H) and heavier at 29 lb, designed for high-volume facilities such as hospitals or busy sports medicine clinics. It holds a combination of oversize, cervical, and three standard HotPacs™.

Both models operate on 110–120V, consume 1000W, and meet rigorous safety standards (UL 60601-1 and CSA C22.2 No. 601.1). Choose the E-1 for efficiency and space savings, or the E-2 for maximum capacity.