Skin Prep Spray
Se connecter pour obtenir les prix des revendeurs
Skin Prep Spray forms a liquid film dressing upon application to the skin to help reduce friction during removal of tapes and films.
Smith & Nephew Skin Prep Spray forms a liquid film dressing upon application to the skin. This film helps to reduce friction during removal of tapes and films.
You can also use it to prepare the skin for attachment of catheters, surrounding ostomy sites, drainage tubes and adhesive dressings.
Can be used in lieu of Mueller Tuffner pre tape or remover spray.
Comes in 120 g spray can.
Caution- for use on intact skin only.
Skin Prep Spray – Features & Benefits
- Improves tape & film adhesion;
- Requires only one coat;
- Easily removed using skin cleanser or soap & water;
- No residue left around the wound after removal;
- No cracking or peeling, even on contoured areas like knees, elbows or heels;
- Allows skin to “breathe” through the film, and maintain its natural temperature;
Skin Prep Spray is for external use only. Keep this product out of the reach of children. Avoid contact with the eyes. In the case of accidental contact, flush eyes thoroughly with water. Do not apply directly to broken skin such as open wounds or deep puncture wounds. Should redness or other signs of irritation appear, discontinue use immediately.
For OTC applications, please follow Directions and Instructions for Use provided by your physician, nurse or healthcare professional. If no instructions were provided, follow the directions below:
Étape 1
Skin should be clean and dry prior to application of SKIN PREP Spray.
Step 2
Apply a uniform coating over entire area you wish to protect, i.e., around stoma, under dressing, catheter site, etc.
Step 3
SKIN-PREP will dry in approximately 30 seconds. If you miss an area that you intended to cover, wait until the original area of application has dried, then reapply to the missed area.
Step 4
For maximum protection, an optional second coating of SKIN-PREP may be applied and allowed to dry before covering area with dressing or other adhesive product.
Step 5
If SKIN-PREP is applied to an area with skin folds or other skin-to-skin contact, make sure that skin-contact areas are separated to allow the coating to thoroughly dry before returning to normal position.
Removal:
Step 1
The removal of adhesive products may also remove SKIN-PREP, so reapplication is necessary any time that adhesive products are changed.
Step 2
Removal of SKIN-PREP is not necessary before reapplication. Clean and dry the area and apply fresh SKIN-PREP as directed above.
Commentaires
Il n'y a pas encore de commentaires